Carbon fiber straps or steel beams for a bowing wall?

Both brace a bowing basement wall from the inside. Here is how Rhino Carbon Fiber straps and steel beams work, and what decides which one fits your wall.

Three Strands Construction3 min read

Illustrative carbon fiber strap bolted to a basement sill plate beside a steel I-beam brace; not a documented Three Strands project

When a basement wall starts to bow, the goal is to stop it from moving any further. We do that two ways: with steel beams or with Rhino Carbon Fiber straps. Both go on the inside of the wall, so neither one means digging up your yard.

Here is how each one works, what it does well and what decides which one fits your wall.

How carbon fiber straps work

Carbon fiber is a fabric woven from very strong, thin fibers. Rhino Carbon Fiber straps are bonded to the wall with epoxy, which hardens into a thin, rigid layer. Following Rhino's instructions, the install goes like this:

  1. The wall is ground down to bare concrete where each strap will go, and cracks are filled first.
  2. A galvanized bracket, wrapped in the top of the strap, is bolted to the wooden sill plate that sits on top of the wall.
  3. The strap is pressed into epoxy down the face of the wall, straight and tight, then coated again.
  4. The bottom of the strap is twisted into a pin and set in epoxy in a hole drilled into the floor. If the floor is in poor shape, it is pinned into the footing instead.

Rhino says tying each strap to the house framing at the top and the floor or footing at the bottom is what lets it use the full strength of the fiber and keeps the wall from sliding at either end. Rhino makes one strap for poured concrete walls and a version woven in two directions for concrete block walls.

What carbon fiber does well

  • It is installed entirely from inside the basement.
  • Once cured, the straps sit flat to the wall. Rhino says they can be painted or covered with finishing materials.
  • The straps don't corrode, and Rhino says they need no ongoing maintenance.
  • They take up almost no floor space, which matters if you plan to finish the basement.

What carbon fiber won't do

According to Rhino, the straps strengthen the wall and stop further inward movement, but they do not push an already bowed wall back to straight. Rhino also points to about 2 inches of inward movement as the limit for its straps.

How steel beams work

Steel I-beams stand upright against the inside of the wall, spaced along its length. Each beam is anchored at the basement floor and bolted to the floor framing above. The wall then pushes against a rigid brace that is held at both ends.

What steel beams do well

  • They are also installed from inside the basement.
  • They give a heavy, stiff brace when a wall has moved past the range carbon fiber is meant for.

The trade-offs

  • An I-beam stands out from the wall several inches, so it takes up more room than a strap.
  • If you finish the basement later, new framing has to be planned around the beams.

What decides which one we recommend

We look at the wall first, then recommend one approach. These are the things that matter most:

  • How far the wall has moved. For walls past about 2 inches, Rhino's own FAQ lists other options, such as a steel system, and recommends adding carbon fiber either way.
  • What the wall is built from. Poured concrete and concrete block walls behave differently, and Rhino makes a different strap for each.
  • Your plans for the basement. If you want to finish the space, slimmer straps leave more room for walls, insulation and drywall.
  • The floor and footing. Both systems anchor at the bottom of the wall, so the condition of the floor and footing shapes the plan.
  • Where the water is coming from. Whatever brace goes in, it helps to fix what keeps the soil wet, such as overflowing gutters, short downspouts or ground that slopes toward the house.

Getting started

Before you reach out, it helps to note whether the wall is poured concrete or block, where the cracks are and how long you have noticed them. Photos of the wall are useful too.

See how we approach bowing walls, or read about the signs of a bowing basement wall.

Ready to plan your project?

Tell us about your home, your goals and your budget. We work with homeowners in Kalamazoo and areas within 50 miles.

More remodeling guides